........................P r i m a S p r i n g s

Sabtu, 12 Februari 2011

VARIABLE AND CONSTANT SUPPORT HANGER

DESCRIPTION OF A VARIABLE SUPPORT HANGER

Variable support hangers are used to support components (e.g. pipes, vessels, etc.) that experience vertical movement due to thermal expansion. Unlike constant support hangers, the variable support hangers are used where the supporting components have the capability to withstand load variations of up to 25%.

The vertical movement is accommodated by a compression spring coil (or stack of coils in series) which is pre-compressed to an initial load setting. During operation, the supported component will travel through its specified movement and the coil(s) will be compressed/decompressed to the final load setting. This difference, or variation, in loads between the initial setting and the final setting gives rise to the term “variable” spring support.

A maximum variability factor of 25% has been established by MSS to limit the load differential which may be prescribed in a variable spring support. The variability is a ratio of the change in load compared to the final load. When prescribing variable spring supports, attention must be given to the spring rate and the desired amount of travel to insure the variability factor remains below 25%.

The movement of a variable spring hanger rod supporting a load is animated in the video clip. The initial load position is designated as “cold position”in the animation. As the load moves upward, the spring is decompressed to the final load position designated as “hot position”. The load difference (variation) is produced by the coil’s change in compression multiplied by the spring rate. The change in compression of the coil causes a direct change in the supported load as seen at the hanger rod.

DESCRIPTION OF A CONSTANT SUPPORT HANGER

Constant support hangers are used to support structures (e.g. pipes, vessels, etc.) that experience vertical movement due to thermal expansion. The constant hangers provide support at critical locations of a structure such that the temperature dependent deformation of the structure does not produce any excess stress in the structural system.

Theoretically, a constant support provides a constant force on the structure so that it does not experience any extra resisting forces from the support. However, in reality, complete constant load reaction is not possible. That is why the MSS standard allows a maximum tolerance of 6% of the constant load throughout the entire travel range.

Constant resistance to a moving load is achieved by balancing the moment of the moving structure by the moment produced by the force of a compressing/decompressing spring about a common pivot point.

The movement of the constant hanger rod, supporting a load, is animated in the video clip. As the hanger rod connected to the cam moves down (or up) on the left hand side, the spring on the right hand side is compressed (or decompressed) by the spring rod.

Here, the moment of the external load acting downward along the hanger rod varies as the supporting pipe moves (down or up). The variations of the moment (due to changing moment arm length) of the moving external constant force is balanced by compressing (or decompressing) the spring with the lever arm about the same pivot point.

In designing a constant support hanger, minimum variation of the load is optimized via selecting the proper arm lengths of the external force and the spring force, and the spring constant for a given total displacement of the external load.

Backlink: http://www.pipingtech.com/technical/vid/function-of-spring-hanger.html

Selasa, 08 Februari 2011

UNIT CONVERTER

Apakah anda pelajar, mahasiswa atau siapa saja yang selalu dipusingkan oleh adanya perbedaan satuan dalam perhitungan. Berikut ini adalah link yang membawa anda ke kalkulator pengubah satuan secara on line. Klik saja disini.
Atau mau secara offline unduh saja aplikasinya disini

Rabu, 12 Januari 2011

PROPOSAL

PENAWARAN KERJASAMA REKANAN

(PENAWARAN PRODUK & PENGERJAAN JASA TEKNIK)

 VIBRATION SPRING ISOLATOR ( SPRING ENGINE MOUNTING & RUBBER FLEXIBLE JOINT ) & DAMPED SPRING MONTING

System bantalan untuk meredam getaran dan kebisingan, serta mengeliminasi keretakan lantai /dinding yang terjadi dalam sebuah gedung. Produk tersebut dipakai pada mesin-mesin: Chiller, Laundry, Water Pumping, AHU, Generator set, Blower, dsb.

 WATER REGULATOR :

Berfungsi untuk mengatur tekanan dan penghemat pemakaian air serta dapat mengurangi kerusakan peralatan pada sistem out-put air. Hemat air berarti hemat energi dan hemat biaya.)

 BUILDING FLOODGATE / FLOOD PROTECTION BARRIER :

System teknologi pintu untuk menahan terjangan air banjir agar tidak sampai memasuki gedung atau halaman gedung

 MECHANICAL ENGINEERING ( PEKERJAAN REKAYASA TEKNIK )

Company Profile

Our company have been established in many years experience to support a wide range of mechanical & technical services, technology systems, and industrial parts & components for many companies, such as:

textile company
weapon industry
automotive
mining company
oil exploration company
pharmaceutical Industry
commercial & office building,
hotel & hospital
steel stamping industry, and other industrial companies.

Our Products and Services have been applicated and supplied to many companies, such as below :

Pindad, PT ( Persero ) Grahaniaga Tatautama, PT

Federal Chain Manufacturing, PT Plaza Permata-Jakarta

Bukaka Teknik Utama, PT Panin Building-Jakarta

Pindo Deli Pulp & Paper, PT Hyatt Regency Hotel

Pan Asia Group Solusindo Utama, PT

Phapros Indonesia, PT Fajar Buana Indopack, PT

Galenium Laboratories, PT Pandu Dayatama Patria, PT

Mega Andalan Kalasan, PT (medical & Hospital equipment) Holiday inn Bandung

Sanbe Farma, PT Radi Daya Prima, PT

Dwidaya Intranusa, PT

Mining, Train and Cement Industry company, Etc.

Prima Springs Mfg is a national private company that located in Bandung - Jawa Barat -Indonesia. Pioneered by many experienced engineers, our company has further developed and has capabilities to manufacture in a wide range of industrial components and services. And in the recent time we are responsible to handle many projects from many companies.

We are committed to continue improvement and serving our customers in the most effective ways possible, and constantly looking for a new ways to supply our costumers with new and improved products and services.

We are pleased to discuss your exact requirements in more detail.
For further information, order, and free technical assistance, please contact us, directly :

primasprings@yahoo.co.id

or visit our website :

www.primasprings.com